From: Edwards, Andrew M (andrew.m.edwards@boeing.com)
Date: Tue Aug 10 2004 - 12:52:58 GMT-3
Depends upon lab but here's a few...
1. use a summary address in RIP v2.
2. add network to a different routing protocol and redistribute
HTH,
andy
-----Original Message-----
From: ccie2be [mailto:ccie2be@nyc.rr.com]
Sent: Tuesday, August 10, 2004 4:29 AM
To: marc van hoof; ccielab@groupstudy.com
Subject: Re: Loopback into RIP
Besides running RIP on the loopback address with the network command?
----- Original Message -----
From: "marc van hoof" <mvh@marcvanhoof.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, August 10, 2004 7:20 AM
Subject: Loopback into RIP
> Is there a way other than redistributing connected to dynamically
advertise
> loopback interface addresses into RIP ?
>
>
>
> Cheers,
>
> -marc.
>
> ______________________________________________________________________
> _
> Please help support GroupStudy by purchasing your study materials
from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:36 GMT-3