From: jongsoo.kim@intelsat.com
Date: Tue Aug 10 2004 - 12:18:40 GMT-3
The way I understand this commnad is to enable somewhat multicast capability on NBMA link such as F/R PVC.
This is my interpretation.
So let's say R1,R2,R3 are PIM neighbor, if R1 connected to R2 and R3 via multipoint PVC using hub and spoke, then by using this command, R1 can send multicast to R2 and R3, which of course should be two identical multicast traffic stream but with different DLCI.
If this is the case, I think only R1 needs this commnad as R1 is HUB and R2 and R3 are spoke.
Am I in a right track on this??
Also, I can't figure out why sparse-dense mode shouldn't use this command.
Thanks folks
JK
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:36 GMT-3