From: James Yeo (james@net-brigade.com)
Date: Fri Aug 06 2004 - 19:30:52 GMT-3
With regards to ATM and an SVC for exaple, how does one apply a policy map
to it using CBWFQ?
Thanks
James
----- Original Message -----
From: "Wang Dehong-DWANG1" <Dehong.Wang@motorola.com>
To: "Group Study" <ccielab@groupstudy.com>
Sent: Friday, August 06, 2004 2:56 PM
Subject: silly ATM question maybe..
> With so many experts on this wonderful list, I like to ask another
question. I am a little bit confused by reading configuring ATM.. Regarding
ATM PVC, one is static and another is dynamic. Can I assume that this is
similar to frame-relay map and invers-arp? The impression I have is that ATM
will not work by simply configuring the IP address and PVC in the interface
so I always have to use the static map to reach other end.
>
>
> Mapping a Protocol Address to a PVC
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fwan_c/wcfatm.htm#1001091
>
>
> Configuring Classical IP and Inverse ARP in a PVC Environment
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fwan_c/wcfatm.htm#1002573
>
> what is the difference? thanks in advance.
>
> - Dehong
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:34 GMT-3