From: marc van hoof (mvh@marcvanhoof.com)
Date: Tue Aug 03 2004 - 11:20:33 GMT-3
No, you map the remote IP to the local DLCI... unlike x25, DLCI's aren't
globally interesting....
Eg.
Int Serial 0/1.1 Multipoint
Ip address 10.0.0.1 255.0.0.0
Frame-relay map ip 10.0.0.2 102
Frame-relay map ip 10.0.0.3 103
..
-mvh.
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> jongsoo.kim@intelsat.com
> Sent: Wednesday, 4 August 2004 12:08 AM
> To: ccielab@groupstudy.com
> Subject: some stupid question
>
> When I configure a multipoint interface using F/R PVC or ATM PVS/SVC on
> test, is it necessary to map router's local interface ip address in
> addition to the remore interface with DLCI or NSAP??? The only value I
> see by mapping this is local interface is pingable. Most solution I've
> seen from IPexpert always inlcudes this.
>
>
> Thanks
>
> Jongsoo
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:31 GMT-3