From: Danny Andaluz (groupstudy@gmail.com)
Date: Mon Aug 02 2004 - 10:32:04 GMT-3
Hi,
Does anyone know of any bug that would cause a 3620's serial
interfaces go down every day at the same time? I don't beleive it is
a carrier issue. The router's CPU never goes above 40 % and the
utilization of the links does not rise above 20%. Here is a show
version:
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-I-M), Version 12.0(7)T3, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 03-Jul-03 20:16 by dchih
Image text-base: 0x600088F0, data-base: 0x60856000
ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
VVV uptime is 5 weeks, 4 days, 16 hours, 1 minute
System returned to ROM by reload at 17:24:14 EDT Wed Jun 23 2004
System restarted at 17:24:53 EDT Wed Jun 23 2004
System image file is "flash:c3620-i-mz.120-7T3.bin"
Network configuration file is "tftp://135.89.201.10/change_file"
cisco 3620 (R4700) processor (revision 0x81) with 28672K/4096K bytes of memory.
Processor board ID 19346283
R4700 CPU at 80Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s)
4 Serial network interface(s)
DRAM configuration is 32 bits wide with parity disabled.
29K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Thanks,
Danny
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:31 GMT-3