From: steve.skinner@uk.pwc.com
Date: Mon Aug 02 2004 - 08:19:42 GMT-3
Good day to all CCIE`s ...future CCIE`s CCIE lab proctor`s and CCIE
bootcamp Proctor`s
i have a quiery regarding
IS -IS
R1 (l1/l2) ------R2 (L1/L2)-----R3 L1
R1 and R2/3 are in the same area
this is about routes seen from R3
if on R1 i do two things
redistribute ip static type-L1 ( i think )
this put`smy connected interfaces ( lo10) into L1 only ( i.,e loopback
150.150.1.1)
and
i advertisre a summary addres of 150.150.1.0 ( same class) into L2 only
i now have two routes for 150.150.1.1..
1 coming from an L1 update ...and 1 from an L2 update
if both these routes were both identical ( which bieng a summary that would
not usually be the case )
then R3 should recieve two route`s
1 from the L1 update and 1 from the L2 update .
which 1 would go into the main ip routing table ???
iam not doing route leaking or anything else
any clue`s ...
Many thanks
Stephen Skinner
Senior Network Support Analyst
UK IT
Price WaterHouse Coopers
Tel +44 207 2134182
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:31 GMT-3