From: thunai (thunai@cisco.com)
Date: Sun Aug 01 2004 - 03:01:48 GMT-3
Thanks Robert , I have not added the filter rules. Is there any Easy
way I can configure the filter(assign rule ) using menu. It seems to
very difficult.
Regds
Thunai
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Larry Roberts
Sent: Sunday, August 01, 2004 10:03 AM
To: 'thunai'; security@groupstudy.com
Cc: ccielab@groupstudy.com
Subject: RE: OSPF on VPN
Does OSPF work to the inside?
Can you remove the filter from the outside completely and see if it
pass's packets? ( obviously not on the internet !)
Did you use the same area under the interface as you defined in the ip
routing section?
What do you mean by #6 ? By default ospf is filtered by the "public
default" filter, so you would need to add it to the filter. I didn't
understand if you added it, or if you thought it was already added. It
should appear on the left side of the filters list for it to be active.
Other than those questions, it sounds like it should work. I run OSPF on
my concentrators at work, and it was pretty simple to setup. Biggest
issue I had was advertising my remote ospf networks into OSPF. Took me
several hours before the check mark for ASBR jumped out at me!
-----Original Message-----
From: thunai [mailto:thunai@cisco.com]
Sent: Saturday, July 31, 2004 11:09 PM
To: 'Larry Roberts'; security@groupstudy.com
Cc: ccielab@groupstudy.com
Subject: RE: OSPF on VPN
Hai
I have done the following steps .
1. Set OSPF Router ID
2. Enable OSPF
3. Defined the area
4. Enable ospf on the outside interface
5. Assigned Public defacult filter to Ouside Interface
6. Checked the filters for OSPF in / OSPF out.
But still VPN is not sending any packets to the outside.. I did a
debug on the router I am not receiving any packet on the router from VPN
concentrator
If any body has any clue please help me
Regds
Thunai
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Larry Roberts
Sent: Saturday, July 31, 2004 9:03 PM
To: 'thunai'; security@groupstudy.com
Subject: RE: OSPF on VPN
What all have you done to enable it?
You need to enable ospf and provide its parameters under the interface
itself, and you also need to to enable OSPF under ip routing as well.
Does it work to the inside?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
thunai
Sent: Saturday, July 31, 2004 6:16 AM
To: security@groupstudy.com
Subject: OSPF on VPN
Hai
I trying to enable OSPF on the public interface , I could not
succseed. Is there any way i can trouble shoot ospf on VPN concentrator
.
I have i r3-------(public inter face )----vpn---(rip)-----r2. I am
getting rip routes on r2. But i am not getting any packets from vpn
concetrator to r3.
Please help me
Regds
Thunai
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:30 GMT-3