From: Elliott Reyes (elliottreyes@adelphia.net)
Date: Sat Jul 31 2004 - 15:21:26 GMT-3
Is this correct, I'm curious to the answer myself :)
E
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
thunai
Sent: Friday, July 30, 2004 9:20 PM
To: 'Brian Dennis'; ccielab@groupstudy.com
Cc: security@groupstudy.com
Subject: RE: No peer neighbor-route
Hai
My understanding is with the no peer neighbor route command PPP will
create a host route on either side , the moment the link is down. It
will remove that host route which will cause a database change in ospf
make your demand circuit flap..
In my case with having no peer neighbour route I can see host route
create and deleted from the routing table. Still my demand circuit works
with out kicking the isdn.
Regds
Thunai
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Brian Dennis
Sent: Saturday, July 31, 2004 1:50 AM
To: thunai; ccielab@groupstudy.com
Cc: security@groupstudy.com
Subject: RE: No peer neighbor-route
Thunai,
What is your understanding of the problem the peer neighbor
route creates with an OSPF demand circuit?
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com Internetwork Expert, Inc.
http://www.InternetworkExpert.com Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
thunai
Sent: Friday, July 30, 2004 7:18 AM
To: ccielab@groupstudy.com
Cc: security@groupstudy.com
Subject: No peer neighbor-route
Hai
I am using Cisco IOS ver 12.2(7r). I am have two routers connected
over ISDN running ospf. With out using no peer neighbor-route my demand
circuit is working. I can see the 32 bit host route installed on the
both the router and removed the isdn comes down. However my demand
ciruit still working. Is that a recent addition....
Regds
Thunai
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:08 GMT-3