From: Jung, Jin (jin.jung@lmco.com)
Date: Sat Jul 31 2004 - 12:16:40 GMT-3
Thanks David,
DO you have sample config for comp-lzs?
-----Original Message-----
From: David Prall [mailto:dcp@dcptech.com]
Sent: Friday, July 30, 2004 10:05 PM
To: Jung, Jin; ccielab@groupstudy.com
Cc: security@groupstudy.com
Subject: RE: Crypto - compress only with SA-VAM
nobody@groupstudy.com <mailto:nobody@groupstudy.com> wrote:
> Subject: Crypto - compress only with SA-VAM
>
>
> Folks,
> I am testing a compression for SA-VAM card using comp-lzs. And On the
> other side I have 2600 AIM compression card.
>
> I need to test compression function between these two routers.
>
> I am not trying to do encryption but just a compression.
> And I need to come up with compression ratio between these two router.
>
> Question #1, what are my option for compression? Is comp-lzs only my
> option since I am trying to use SA-VAM and AIM card? Can I do stac or
> other compression method?
>
> Question#2, If I have to use comp-lzs to utilize the SA-VAM card,
> Could you send me a sample config? And Since I am setting up
> encryption, DO I need ipsec preshare, or IPSEC key??
>
> Question#3, What about 2600 AIM compression card, same config?
>
>
> Thanks...
The SA-VAM does layer 3 compression IPPCP. The AIM-COMP does layer 2
compression. These two modules will not work together. You have to do
comp-lzs as a crypto map on both ends. The SA-VAM will have hardware
accelleration for the 7200, while the 2600 will do it in software.
Comp-lzs is a resource hog, so you will see high cpu utilization on the
2600.
David
-- David C Prall dcp@dcptech.com http://dcp.dcptech.com
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:08 GMT-3