From: thunai (thunai@cisco.com)
Date: Sat Jul 31 2004 - 03:49:27 GMT-3
Thanks Guys .. I have resolved the Issue...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
thunai
Sent: Saturday, July 31, 2004 11:21 AM
To: ccielab@groupstudy.com
Subject: Adv Router Not-reachable
Dear all ,
I am working on a scenario where r1 , r2 and r3 are connected using
Frame-relay cloud.
R1-------r2-------r3 .where on r2 i am not allowed to use broadcaset
key word. , r3 is a point to point interface and r1 is a multipoint
interface. I am running ospf area 0 on all the there router interfaces.
I have declared all the interfaces as ip ospf net point-to-multipoint
and I have used neighbor command on r2. My neighbor adj is fromed
between all the three. However no routes are exchanged.
In show ip ospf data router on all the three routers show adv router
not-reachable.
Can any body point out why this is happening.
Regds
Thunai
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:07 GMT-3