From: ccie2be (ccie2be@nyc.rr.com)
Date: Thu Jul 29 2004 - 10:39:47 GMT-3
Good point !!!
----- Original Message -----
From: "Alexander Arsenyev (GU/ETL)" <alexander.arsenyev@ericsson.com>
To: "'ccie2be'" <ccie2be@nyc.rr.com>; "Group Study" <ccielab@groupstudy.com>
Sent: Thursday, July 29, 2004 9:21 AM
Subject: RE: Generating enough pings to make dialer load threshold kick in
> Do not forget to change default load-interval to minimum (30 secs) or You
might be losing Your temper trying to bring second channel up by (seemingly)
endless pinging...
> HTH,
> Cheers
> Alex
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> ccie2be
> Sent: 29 July 2004 13:51
> To: Group Study
> Subject: Generating enough pings to make dialer load threshold kick in
>
>
> Hi guys,
>
> Let's say the requirement is to have the 2nd bri circuit come up when the
1st
> circuit is at 80% utilization.
>
> What ping parameters should I adjust to generate enough traffic to get the
1st
> circuit over 80% utilization?
>
> I know I can change the repeat and packet size values, but what values
should
> I use?
>
> TIA, Tim
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:05 GMT-3