Frame-Relay, ATM and Maximum-bandwidth

From: gladston@br.ibm.com
Date: Wed Jul 28 2004 - 15:36:28 GMT-3

• Next message: mo ddin: "VOIP hardware requirement for 2611 and 1750?"
• Previous message: gladston@br.ibm.com: "Re: BGP Dampening - Many Way of Configuration Scenerio"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Am I missing something or these docs say opposite things about the same
command:

"The max-reserved bandwidth command is intended for use on main interfaces
only; it has no effect on virtual circuits (VCs) or ATM permanent virtual
circuits (PVCs)."

from 'Low Latency Queueing with Priority Percentage Support', 12.2(2)T New
Feature
(http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t2/ftllqpct.htm)

"You now can increase the maximum reservable bandwidth value on ATM PVCs
using the max-reserved-bandwidth command"

from 'Comparing the bandwidth and priority Commands of a QoS Service Policy'
(http://www.cisco.com/en/US/tech/tk543/tk757/technologies_tech_note09186a0080103eae.shtml)

• Next message: mo ddin: "VOIP hardware requirement for 2611 and 1750?"
• Previous message: gladston@br.ibm.com: "Re: BGP Dampening - Many Way of Configuration Scenerio"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:05 GMT-3