From: Kenneth Wygand (KWygand@customonline.com)
Date: Tue Jul 27 2004 - 09:48:52 GMT-3
Geert,
What things need to match before an adjacency can form for ISIS? (Think about this before continuing to read my email). Yes, MTU size is one, but that's not the only one. ;-)
If you are still stuck, try a "debug isis adjacency" to see why your adjacency is not forming... the answer should jump out at you. :)
By the way, you are correct in that disabling the "hello-padding" will allow adjacencies to form independent of the MTU mismatch on both sides.
Ken
________________________________
From: nobody@groupstudy.com on behalf of Geert Nijs
Sent: Tue 7/27/2004 3:58 AM
To: ccielab@groupstudy.com
Subject: ISIS Hello Padding
Hi group,
i just discovered the following command:
(config-if)# no isis hello padding
I can`t find anything about this command in the alfabetic key index on the doc cd ???
I was thinking that this command could maybe resolve an MTU mismatch on a link, but i just
configured a Frame Relay interface with a different MTU size on each side, put this command on both
sides, but adjacency still doesn`t come up. So what does it do exactly ?
Regards,
Geert
#####################################################################################
This e-mail and any attached files are confidential and may be legally privileged.
If you are not the addressee, any disclosure, reproduction, copying, distribution,
or other dissemination or use of this communication is strictly prohibited.
If you have received this transmission in error please notify Simac immediately
and then delete this e-mail.
Simac has taken all reasonable precautions to avoid virusses in this email.
Simac does not accept liability for damage by virusses, for the correct and complete
transmission of the information, nor for any delay or interruption of the transmission,
nor for damages arising from the use of or reliance on the information.
All e-mail messages addressed to, received or sent by Simac or Simac employees
are deemed to be professional in nature. Accordingly, the sender or recipient of
these messages agrees that they may be read by other Simac employees than the official
recipient or sender in order to ensure the continuity of work-related activities
and allow supervision thereof.
#####################################################################################
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:04 GMT-3