From: ccie2be (ccie2be@nyc.rr.com)
Date: Mon Jul 26 2004 - 16:38:10 GMT-3
Thanks Brian.
But, does the output from your earlier post mean that keepalives are NOT a
legit characteristic to set on a BRI interface (without the leased-line
command)? And, if so, shouldn't the IOS complain if someone tries to set a
keepalive value?
Thanks again.
----- Original Message -----
From: "Brian Dennis" <bdennis@internetworkexpert.com>
To: "ccie2be" <ccie2be@nyc.rr.com>; <jvillavalls@yahoo.com>;
<ccielab@groupstudy.com>
Sent: Monday, July 26, 2004 3:29 PM
Subject: RE: keepalive on BRI
Keepalives under the ISDN interface will become enabled if you issue the
"isdn leased-line <interface>" command.
Rack1R4(config)#do sho int br0/0 | in Keep
Rack1R4(config)#
Rack1R4(config)#isdn leased-line br0/0
Rack1R4(config)#do sho int br0/0 | in Keep
Keepalive set (10 sec)
Rack1R4(config)#int br0/0
Rack1R4(config-if)#keep 30
Rack1R4(config-if)#do sho int br0/0 | in Keep
Keepalive set (30 sec)
Rack1R4(config-if)#
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: ccie2be [mailto:ccie2be@nyc.rr.com]
Sent: Monday, July 26, 2004 12:24 PM
To: Brian Dennis; jvillavalls@yahoo.com; ccielab@groupstudy.com
Subject: Re: keepalive on BRI
Hey Brian,
I see the output below but I don't why nothing shows up for the bri0/0
interface. What does that mean?
Thanks
----- Original Message -----
From: "Brian Dennis" <bdennis@internetworkexpert.com>
To: <jvillavalls@yahoo.com>; <ccielab@groupstudy.com>
Sent: Monday, July 26, 2004 1:56 PM
Subject: RE: keepalive on BRI
> Have you tried to apply the command to a BRI interface to see if it
even
> has any affect?
>
> Rack1R4(config-if)#int s0/0
> Rack1R4(config-if)#keep 30
> Rack1R4(config-if)#do sho int s0/0 | in Keep
> Keepalive set (30 sec)
> Rack1R4(config-if)#no keep
> Rack1R4(config-if)#do sho int s0/0 | in Keep
> Keepalive not set
> Rack1R4(config-if)#int br0/0
> Rack1R4(config-if)#keep 30
> Rack1R4(config-if)#do sho int bri0/0 | in Keep
> Rack1R4(config-if)#
> Rack1R4(config-if)#no keep
> Rack1R4(config-if)#do sho int bri0/0 | in Keep
> Rack1R4(config-if)#
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> bdennis@internetworkexpert.com
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> jvillavalls@yahoo.com
> Sent: Monday, July 26, 2004 8:52 AM
> To: ccielab@groupstudy.com
> Subject: keepalive on BRI
>
> Hi,
> Anyone knows why or when should I deactivate the keepalives on BRIs??
>
> examples:
> int bri0/0
> no keepalive
>
>
> thanks.
>
>
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:03 GMT-3