From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Mon Jul 26 2004 - 16:26:58 GMT-3
Richard,
Yes, the keepalives will become enabled IF you issue the "isdn leased-line br0/0" command, but for CCIE lab ISDN preparation a leased line ISDN configure is a little out there ;-)
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
________________________________________
From: Richard Dumoulin [mailto:richard.dumoulin@vanco.es]
Sent: Monday, July 26, 2004 11:55 AM
To: Brian Dennis; jvillavalls@yahoo.com; ccielab@groupstudy.com
Subject: RE: keepalive on BRI
It had effect at least in the past then. I remember when few years ago in another, an admin misconfigured his NMS. By error it configured 300 routers BRI interfaces with the no keepalive command by SNMP. It was a permanent ISDN connection that needed reconnection from time to time. But for some reason, due to the keepalive missing, the routers thought they were still connected. They were all down !!
--Richard
-----Original Message-----
From: Brian Dennis [mailto:bdennis@internetworkexpert.com]
Sent: lunes, 26 de julio de 2004 19:57
To: jvillavalls@yahoo.com; ccielab@groupstudy.com
Subject: RE: keepalive on BRI
Have you tried to apply the command to a BRI interface to see if it even has any affect?
Rack1R4(config-if)#int s0/0
Rack1R4(config-if)#keep 30
Rack1R4(config-if)#do sho int s0/0 | in Keep
Keepalive set (30 sec)
Rack1R4(config-if)#no keep
Rack1R4(config-if)#do sho int s0/0 | in Keep
Keepalive not set
Rack1R4(config-if)#int br0/0
Rack1R4(config-if)#keep 30
Rack1R4(config-if)#do sho int bri0/0 | in Keep Rack1R4(config-if)#
Rack1R4(config-if)#no keep
Rack1R4(config-if)#do sho int bri0/0 | in Keep Rack1R4(config-if)#
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security) bdennis@internetworkexpert.com Internetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of jvillavalls@yahoo.com
Sent: Monday, July 26, 2004 8:52 AM
To: ccielab@groupstudy.com
Subject: keepalive on BRI
Hi,
Anyone knows why or when should I deactivate the keepalives on BRIs??
examples:
int bri0/0
no keepalive
thanks.
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:03 GMT-3