From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Mon Jul 26 2004 - 14:56:52 GMT-3
Have you tried to apply the command to a BRI interface to see if it even
has any affect?
Rack1R4(config-if)#int s0/0
Rack1R4(config-if)#keep 30
Rack1R4(config-if)#do sho int s0/0 | in Keep
Keepalive set (30 sec)
Rack1R4(config-if)#no keep
Rack1R4(config-if)#do sho int s0/0 | in Keep
Keepalive not set
Rack1R4(config-if)#int br0/0
Rack1R4(config-if)#keep 30
Rack1R4(config-if)#do sho int bri0/0 | in Keep
Rack1R4(config-if)#
Rack1R4(config-if)#no keep
Rack1R4(config-if)#do sho int bri0/0 | in Keep
Rack1R4(config-if)#
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
jvillavalls@yahoo.com
Sent: Monday, July 26, 2004 8:52 AM
To: ccielab@groupstudy.com
Subject: keepalive on BRI
Hi,
Anyone knows why or when should I deactivate the keepalives on BRIs??
examples:
int bri0/0
no keepalive
thanks.
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:03 GMT-3