From: Hai Minh (minh@labvn.net)
Date: Mon Jul 26 2004 - 09:11:07 GMT-3
Ken
Enable RIPv2 on R2 and use no auto-summary command.
----- Original Message -----
From: "Kenneth Wygand" <KWygand@customonline.com>
To: "Geert Nijs" <geert.nijs@simac.be>
Cc: <ccielab@groupstudy.com>
Sent: Monday, July 26, 2004 6:59 AM
Subject: RE: Quiz Question of the Day 20040725
> ?
> Geert,
>
> 1) Yes, you are correct that with "no auto-summary" on R1, R2 will only
see the /24 route. I mis-spoke in my last email, as the route still shows
up in the rip database (show ip rip database) as a /8 due to "auto-summary".
It appears as if Rip will automatically auto-summarize into its own
database. It seems that "no auto-summary" doesn't prevent Rip from putting
the auto-summarized address into its own database, rather it prevents the
auto-summarized addresses from entering the RIB from the Rip process.
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:03 GMT-3