From: Hai Minh (minh@labvn.net)
Date: Mon Jul 26 2004 - 06:49:14 GMT-3
Hi
I used a class B addresses on 3 routers, and I forgot the split-horizon rule
:-)
Thank you
----- Original Message -----
From: "Georg Pauwen" <pauwen@hotmail.com>
To: <minh@labvn.net>; <ccielab@groupstudy.com>
Sent: Monday, July 26, 2004 12:14 PM
Subject: RE: RIPv1 doesn't send update over 2950
> Hello,
>
> what are the IP adresses and masks you are using on the 3 routers ?
>
> Regards,
>
> Georg
>
>
> >From: "Hai Minh" <minh@labvn.net>
> >Reply-To: "Hai Minh" <minh@labvn.net>
> >To: <ccielab@groupstudy.com>
> >Subject: RIPv1 doesn't send update over 2950
> >Date: Mon, 26 Jul 2004 10:13:38 +0700
> >
> >Hi
> >
> >I connect 3 router 25xx to a switch 2950 and enable RIPv1 on these
routers.
> >When I show routing table on 3 routers, I don't see any update from the
two
> >others. I use debug ip rip and I found :
> >01:33:17: RIP: sending v1 update to 255.255.255.255 via Ethernet0
> >(150.50.7.6)
> >01:33:17: RIP: build update entries - suppressing null update.
> >I tried to use neighbor, but it's useless.
> >If I switch to RIPv2, everything is OK.
> >
> >Does anyone know this error ? The switch 2950 doesn't accept broadcast ?
> >
> >Thank you
> >
> >_______________________________________________________________________
> >Please help support GroupStudy by purchasing your study materials from:
> >http://shop.groupstudy.com
> >
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
>
> _________________________________________________________________
> MSN Messenger : discutez en direct avec vos amis !
> http://www.msn.fr/msger/default.asp
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:03 GMT-3