From: Georg Pauwen (pauwen@hotmail.com)
Date: Mon Jul 26 2004 - 02:14:02 GMT-3
Hello,
what are the IP adresses and masks you are using on the 3 routers ?
Regards,
Georg
>From: "Hai Minh" <minh@labvn.net>
>Reply-To: "Hai Minh" <minh@labvn.net>
>To: <ccielab@groupstudy.com>
>Subject: RIPv1 doesn't send update over 2950
>Date: Mon, 26 Jul 2004 10:13:38 +0700
>
>Hi
>
>I connect 3 router 25xx to a switch 2950 and enable RIPv1 on these routers.
>When I show routing table on 3 routers, I don't see any update from the two
>others. I use debug ip rip and I found :
>01:33:17: RIP: sending v1 update to 255.255.255.255 via Ethernet0
>(150.50.7.6)
>01:33:17: RIP: build update entries - suppressing null update.
>I tried to use neighbor, but it's useless.
>If I switch to RIPv2, everything is OK.
>
>Does anyone know this error ? The switch 2950 doesn't accept broadcast ?
>
>Thank you
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:03 GMT-3