From: Georg Pauwen (pauwen@hotmail.com)
Date: Sun Jul 25 2004 - 18:51:49 GMT-3
Hello,
auto-summary needs to be turned off on R1, the other way to advertise the
address is to use the ip summary-address eigrp 1 1.1.1.0 255.255.255.0
command on the R1 interface connected to R2. Not sure though if that second
way is the CCIE lab allowed way...
Regards,
Georg
>From: "Kenneth Wygand" <KWygand@customonline.com>
>Reply-To: "Kenneth Wygand" <KWygand@customonline.com>
>To: <ccielab@groupstudy.com>
>Subject: Quiz Question of the Day 20040725
>Date: Sun, 25 Jul 2004 17:10:15 -0400
>
>?
>Quiz Question of the Day 20040725:
>
>I have two routers back to back, R1 and R2. Both routers are running EIGRP
>on the interface between them. R1 also has a loopback interface it is
>advertising throughout the EIGRP domain natively (network command). The
>address of this loopback address is 1.1.1.1 /24.
>
>If I want R2 to receive 1.1.1.1 /24 in both its EIGRP topology table and
>RIB table, one way I can do this is by turning off the "auto-summary"
>feature within the EIGRP routing protocol.
>
>1) Which router do I need to turn off the "auto-summary" feature to have R2
>see this as a /24 route?
>
>2) Are there any other ways I can accomplish this within the "standard
>confines" of the CCIE lab?
>
>Good Luck!
>Ken
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:03 GMT-3