From: Geert Nijs (geert.nijs@simac.be)
Date: Sat Jul 24 2004 - 12:06:46 GMT-3
Hi group,
From the first lab in the new CCIE Practise Book (http://www.amazon.com/exec/obidos/tg/detail/-/1587051478/qid=1090681131/sr=8-2/ref=sr_8_xs_ap_i2_xgl14/102-2968721-5624117?v=glance&s=books&n=507846#product-details)
"Configure R8 to have an EIGRP hello interval of 25 seconds on its Ethernet0/0 interface"
Simple enough, but the solution mentions that the hello interval of all neighboring routers (R6 in this case)
also has to be changed/adjusted in order to avoid "flapping" neighbors and routes ??
It was my understanding that the hello+hold timers could be different between neighbors in EIGRP.
(the hello packets include the hold interval, so the receiving router has no problems with a hold interval
different than its own).
Actually, i have configured them differently in my lab (hello+adjusted hold), and my adjacencies don't flap at all.
Am i missing something here ? And what to do in the real lab ??
Regards,
Geert
#####################################################################################
This e-mail and any attached files are confidential and may be legally privileged.
If you are not the addressee, any disclosure, reproduction, copying, distribution,
or other dissemination or use of this communication is strictly prohibited.
If you have received this transmission in error please notify Simac immediately
and then delete this e-mail.
Simac has taken all reasonable precautions to avoid virusses in this email.
Simac does not accept liability for damage by virusses, for the correct and complete
transmission of the information, nor for any delay or interruption of the transmission,
nor for damages arising from the use of or reliance on the information.
All e-mail messages addressed to, received or sent by Simac or Simac employees
are deemed to be professional in nature. Accordingly, the sender or recipient of
these messages agrees that they may be read by other Simac employees than the official
recipient or sender in order to ensure the continuity of work-related activities
and allow supervision thereof.
#####################################################################################
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:02 GMT-3