From: Joseph D. Phillips (josephdphillips@fastmail.us)
Date: Sat Jul 24 2004 - 10:54:13 GMT-3
Your frame map is wrong, I think.
I thought you used frame map dlsw for the older version.
On Sat, 24 Jul 2004 14:34:13 +0100, "Lord, Chris"
<chris.lord@lorien.co.uk> said:
> Hi people, I've been struggling with this one for hours now, please can
> somone put me out of my misery??
>
> If I configure dlsw+ direct encapsulation between two routers both using
> physical interfaces everything works ok. If I then change one end to use
> a frame-relay sub-interface I can't get it to work.
>
> This works......
>
> R1:
>
> bridge 1 proto ieee
> dlsw local peer 20.1.1.1
> dlsw remote 0 frame int s0/0 102 pass-thru
> dlsw bridge 1
>
> int e0
> bridge-group 1
>
> s0/0
> encaps frame
> no frame inv
> ip add 20.1.12.1 255.255.255.0
> frame map ip 20.1.12.1 102
> frame map ip 20.1.12.2 102 broad
> frame map dlsw 102 broad
>
> R2:
>
> bridge 1 proto ieee
> dlsw local peer 20.1.2.2
> dlsw remote 0 frame int s0/0 201 pass-thru
> dlsw bridge 1
>
> int e0
> bridge-group 1
>
> s0/0
> encaps frame
> no frame inv
> ip add 20.1.12.2 255.255.255.0
> frame map ip 20.1.12.2 201
> frame map ip 20.1.12.1 201 broad
> frame map dlsw 201 broad
>
> IF I THEN CHANGE R2 TO THE FOLLOWING, PEERING WILL NOT COME UP......
>
> R2:
>
> bridge 1 proto ieee
> dlsw local peer 20.1.2.2
> dlsw remote 0 frame int s0/0.12 201 pass-thru
> dlsw bridge 1
>
> int e0
> bridge-group 1
>
> s0/0
> encaps frame
> no frame inv
> s0/0.12
> ip add 20.1.12.2 255.255.255.0
> frame map ip 20.1.12.2 201
> frame map ip 20.1.12.1 201 broad
> frame map dlsw 201 broad
>
> Any ideas or advice would be much appreciated.
>
> Chris.
>
>
>
> **********************************************************************
> The information contained in this email is confidential and is intended
> for the recipient only. If you have received it in error, please notify
> us immediately by reply email and then delete it from your system. Please
> do not copy it or use it for any purposes, or disclose its contents to
> any other person or store or copy this information in any medium. The
> views contained in this email are those of the author and not necessarily
> those of Lorien plc.
>
> Thank you for your co-operation.
> **********************************************************************
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:02 GMT-3