From: Ahmed Hassan (ahmed_hassan@rayatelecom.net)
Date: Thu Jul 22 2004 - 10:32:53 GMT-3
I think you switch doesn't have any routers yet.
Try to write the command twice and the switch will accept it. The first
message is a warning that the switch can't find a route to the
destination address.
Cat3550(config)#logging 1.1.1.1
Cannot open logging port to 1.1.1.1
Cat3550(config)#
Cat3550(config)#
Cat3550(config)#logging 1.1.1.1
Cat3550(config)#
Cat3550(config)#
Best regards
Ahmed Hassan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
jvillavalls@yahoo.com
Sent: Thursday, July 22, 2004 1:19 PM
To: ccielab@groupstudy.com
Subject: Syslog configuration on Catalyst 3550
Hello guys,
does someone know why when I configure the switch 3550 to send
informational message to syslog server located at 1.1.1.1 I get the next
message?
cat0(config)#loggin 1.1.1.1
Cannot open logging port to 1.1.1.1
any comment will be appreciate it.
txs
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:00 GMT-3