From: thunai (thunai@cisco.com)
Date: Sun Jul 18 2004 - 02:41:50 GMT-3
Dear Team ,
I am working on GRE tunnel , I have the following
configuration where in r1 is able to pin 12.12.12.1 & 12.12.12.2 where
aa r2 can ping only 12.12.121 ( remote end ) no its own IP addresss.
Both r1 and r2 are Learing Loop back routes through OSPF.
Is there any thing wrong with my Config.
r2#ru inter tu 12
Building configuration...
Current configuration : 155 bytes
!
interface Tunnel12
ip address 12.12.12.2 255.255.255.0
no ip route-cache
no ip mroute-cache
tunnel source Loopback0
tunnel destination 1.1.1.1
end
r2#r1
Trying r1 (10.1.1.1)... Open
r1#ru inter tu 12
Building configuration...
Current configuration : 155 bytes
!
interface Tunnel12
ip address 12.12.12.1 255.255.255.0
no ip route-cache
no ip mroute-cache
tunnel source Loopback0
tunnel destination 2.2.2.2
end
r1#
r1#ro ospf
2.0.0.0/24 is subnetted, 1 subnets
O 2.2.2.0 [110/11] via 10.1.1.2, 00:10:34, Ethernet0
3.0.0.0/24 is subnetted, 1 subnets
O 3.3.3.0 [110/75] via 10.1.1.2, 00:10:34, Ethernet0
150.100.0.0/16 is variably subnetted, 4 subnets, 2 masks
O IA 150.100.32.0/24 [110/74] via 10.1.1.2, 00:10:34, Ethernet0
O 150.100.23.0/24 [110/74] via 10.1.1.2, 00:10:34, Ethernet0
r1#
r2#ro ospf
1.0.0.0/24 is subnetted, 1 subnets
O 1.1.1.0 [110/11] via 10.1.1.1, 00:10:52, FastEthernet0/0
3.0.0.0/24 is subnetted, 1 subnets
O 3.3.3.0 [110/65] via 150.100.23.3, 00:10:52, Serial0/1.1
150.100.0.0/24 is subnetted, 4 subnets
O 150.100.13.0 [110/11121] via 10.1.1.1, 00:10:52, FastEthernet0/0
r2#
Thanks in advance
Regds
Thuna
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:58 GMT-3