From: mani poopal (mani_ccie@yahoo.com)
Date: Sat Jul 17 2004 - 20:28:08 GMT-3
Hi Sergio and Alsontra
Thanks a lot for your quick response. When I looked at Sergio's supporting URLs, I see that I have to get good look at Doc CD(www.cisco.com/univercd). Serio another help, do you how to get to support URL for behaviour of default routes within different routing protocols and doc explaining ip default network 0.0.0.0 0.0.0.0 and ip route 0.0.0.0 0.0.0.0 for different routing protocols. If I am right before IOS 12.2 default static route is redistributed to rip domain by default and not in new IOS(you have to use default information originate command)
Mani
Sergio Jimenez Arguedas <sejimenez@its.co.cr> wrote:
Hi Mani,
A. You cannot set the administrative distance in EIGRP against certain
routes or sources, as you can with other protocols. The command does not
work this way with EIGRP.
Reference:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipr
rp_r/1rfeigrp.htm#wp1017590
B.In the interface to the Neighbor...
INT F0/0
ip summary-address eigrp XXX 0.0.0.0 0.0.0.0
Reference:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipr
rp_r/1rfeigrp.htm#wp1021694
C. You can do it with the traffic-share feature
Reference:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipr
rp_r/1rfeigrp.htm#wp1024898
Rgds,
Sergio
-----Mensaje original-----
De: nobody@groupstudy.com [mailto:nobody@groupstudy.com]En nombre de
mani poopal
Enviado el: sabado, 17 de julio de 2004 14:08
Para: ccielab@groupstudy.com
Asunto: AD of external EIGRP route
Hi Group,
(a.). How do we change the AD of external routes(for one network). I do
not want to use "distance eigrp AS# 90 170, I want to change D EX for only
one particaular route say. 3.0.0.0/8.
(b). How do we advertise a default route in EIGRP without redistributing
default route into eigrp.
(c.)Variance command is used for unequal cost path load balancing, How can
we use variance command to load balace over muliple path(variance 2) and
send 2 packets over first link and 1 packet over second link
any good answer is appriciated
thanks
Mani
B.ENG,A+,CCNA,CCNP,CCNP-VOICE, CSS1,CNA,MCSE
(416)431 9929
MANI_CCIE@YAHOO.COM
---------------------------------
Do you Yahoo!?
Vote for the stars of Yahoo!'s next ad campaign!
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:57 GMT-3