From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Fri Jul 09 2004 - 16:34:09 GMT-3
Wang,
You also need to add a dialer map for the 172.16.124.0 network
(the watched route) on the router that is doing the dialer watch. For
dialer profile configurations this is not required.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Wang Dehong-DWANG1
> Sent: Friday, July 09, 2004 12:12 PM
> To: ccielab@groupstudy.com
> Subject: dialer watch failed..
>
> Question for the ISDN experts.. I worked on a lab scenario to use
dialer
> watch, but for some reasons the dialer watch did not get the
connections
> up. I know the rule of dialer watch is to make sure watched route is
in
> the routing table.. Dailer watch did take some actions, but failed
with
> dialer map/string not present, but I do have dialer map string in the
bri.
>
> Any comments? thanks.
>
> - Dehong
>
> R2#sg
> *Mar 1 01:56:25: DDR: Dialer Watch: watch-group = 1
> *Mar 1 01:56:25: DDR: network 172.16.124.0/255.255.255.0 DOWN,
> *Mar 1 01:56:25: DDR: primary DOWN
> *Mar 1 01:56:25: DDR: Dialer Watch: Dial Reason: Primary of group 1
DOWN
> *Mar 1 01:56:25: DDR: Dialer Watch watch-group 1 -
> dialer map/string not present on BR1
> R2#
> R2#
>
>
>
> R2
> ======
> username R1 password 0 cisco
>
> interface BRI1/0
> ip address 172.16.12.2 255.255.255.0
> encapsulation ppp
> dialer map ip 172.16.12.1 name R1 broadcast 8358661
> dialer map ip 172.16.12.1 name R1 broadcast 8358663
> dialer watch-group 1
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 0835866201
> isdn spid2 0835866401
> no peer neighbor-route
> ppp authentication chap
>
> access-list 107 deny eigrp any any
> access-list 107 permit ip any any
> dialer watch-list 1 ip 172.16.124.0 255.255.255.0
> dialer-list 1 protocol ip list 107
>
> R1
> ======
>
> username R2 password 0 cisco
>
> interface BRI0/0
> ip address 172.16.12.1 255.255.255.0
> encapsulation ppp
> dialer map ip 172.16.12.2 name R2 broadcast 8358662
> isdn switch-type basic-ni
> isdn spid1 0835866101
> isdn spid2 0835866301
> no peer neighbor-route
> ppp authentication chap
> end
>
>
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:51 GMT-3