Re: dialer watch failed..

From: barry zhang (cciestudy2004@yahoo.com.cn)
Date: Fri Jul 09 2004 - 16:31:24 GMT-3


you should dialer map ip 172.16.124.0 in router R2.

Wang Dehong-DWANG1 <Dehong.Wang@motorola.com> wrote:Question for the ISDN experts.. I worked on a lab scenario to use dialer watch, but for some reasons the dialer watch did not get the connections up. I know the rule of dialer watch is to make sure watched route is in the routing table.. Dailer watch did take some actions, but failed with dialer map/string not present, but I do have dialer map string in the bri.

Any comments? thanks.

- Dehong

R2#sg
*Mar 1 01:56:25: DDR: Dialer Watch: watch-group = 1
*Mar 1 01:56:25: DDR: network 172.16.124.0/255.255.255.0 DOWN,
*Mar 1 01:56:25: DDR: primary DOWN
*Mar 1 01:56:25: DDR: Dialer Watch: Dial Reason: Primary of group 1 DOWN
*Mar 1 01:56:25: DDR: Dialer Watch watch-group 1 -
dialer map/string not present on BR1
R2#
R2#

R2
======
username R1 password 0 cisco

interface BRI1/0
ip address 172.16.12.2 255.255.255.0
encapsulation ppp
dialer map ip 172.16.12.1 name R1 broadcast 8358661
dialer map ip 172.16.12.1 name R1 broadcast 8358663
dialer watch-group 1
dialer-group 1
isdn switch-type basic-ni
isdn spid1 0835866201
isdn spid2 0835866401
no peer neighbor-route
ppp authentication chap

access-list 107 deny eigrp any any
access-list 107 permit ip any any
dialer watch-list 1 ip 172.16.124.0 255.255.255.0
dialer-list 1 protocol ip list 107

R1
======

username R2 password 0 cisco

interface BRI0/0
ip address 172.16.12.1 255.255.255.0
encapsulation ppp
dialer map ip 172.16.12.2 name R2 broadcast 8358662
isdn switch-type basic-ni
isdn spid1 0835866101
isdn spid2 0835866301
no peer neighbor-route
ppp authentication chap
end



This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:51 GMT-3