From: ccie2be (ccie2be@nyc.rr.com)
Date: Fri Jul 09 2004 - 09:28:58 GMT-3
Gerry is correct.
When one side has dialer watch configured, the other side shouldn't ever
disconnect the call.
----- Original Message -----
From: <tycampbell@comcast.net>
To: "Lee Donald" <Lee.Donald@bacs.co.uk>; <wing_lam@jossynergy.com>;
"ccie2be" <ccie2be@nyc.rr.com>; "Gerry Hilton" <gerry.hilton@rogers.com>
Cc: "Group Study" <ccielab@groupstudy.com>
Sent: Friday, July 09, 2004 7:12 AM
Subject: RE: isdn pop quiz
> I believe that you do...if you want the link to stay up...
>
> default idle-timeout is 120 seconds...so the line would go down if the
there is no interesting traffic.
>
> quote
> "so that, when the primary link is down and ISDN is up, Ry doesn't shut
> > the ISDN link down due to a lack of interesting traffic"
>
> I agree with Gerry's answer :-)
>
>
> > You don't need anything on RY.
> >
> > If your dialer-watch is configured correctly on RX.
> >
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > wing_lam@jossynergy.com
> > Sent: 09 July 2004 11:41
> > To: ccie2be; Gerry Hilton
> > Cc: Group Study
> > Subject: Re: isdn pop quiz
> >
> > Hi,
> >
> > Is Gerry's answer right?
> >
> > Thx,
> > BBD
> >
> >
> >
> >
> >
> > Gerry Hilton
> >
> > <gerry.hilton@rog To: ccie2be
> > <ccie2be@nyc.rr.com>
> > ers.com> cc: Group Study
> > <ccielab@groupstudy.com>
> > Sent by: Subject: Re: isdn pop
> > quiz
> > nobody@groupstudy
> >
> > .com
> >
> >
> >
> >
> >
> > 07/03/2004 03:50
> >
> > AM
> >
> > Please respond to
> >
> > Gerry Hilton
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Hi.
> >
> > dialer idle-timeout 0
> >
> > so that, when the primary link is down and ISDN is up, Ry doesn't shut
> > the ISDN link down due to a lack of interesting traffic.
> >
> > Gerry
> >
> > ccie2be wrote:
> >
> > >Hey guys,
> > >
> > >How well do you know isdn configuration?
> > >
> > >Here's the scenario:
> > >
> > >Rx and Ry are connected via F/R. They also have an isdn circuit between
> > them.
> > >
> > >Rx is configured with dialer watch and is watching the loopback of Ry.
> > >
> > >Assume that dialer watch is correctly congiured on Rx.
> > >
> > >What, if anything, should be configured on Ry to make dialer watch work
> > well?
> > >
> > >Why?
> > >
> > >_______________________________________________________________________
> > >Please help support GroupStudy by purchasing your study materials from:
> > >http://shop.groupstudy.com
> > >
> > >Subscription information may be found at:
> > >http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> > -----------------------------------------------------
> >
> > You can find us at www.bacslimited.co.uk
> >
> > *****************************************************
> > This communication is confidential and intended for
> > the exclusive use of the addressee only. You should
> > not disclose its contents to any other person.
> > If you are not the intended recipient please notify
> > the sender named above immediately.
> >
> > BACS Limited, registered in England, No 1023742,
> > Drake House, Three Rivers Court, Homestead Road,
> > Rickmansworth, WD3 1FX
> > *****************************************************
> >
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:50 GMT-3