From: ccie2be (ccie2be@nyc.rr.com)
Date: Wed Jul 07 2004 - 19:36:55 GMT-3
Hi Diptish,
How about configuring a distribute-list like this?
distribute-list DEFAULT-ONLY out serial x
ip access-list standard DEFAULT-ONLY
permit 0.0.0.0
HTH, Tim
----- Original Message -----
From: "diptish doshi" <diptishdoshi007@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, July 07, 2004 2:53 PM
Subject: Stub routing in eigrp
> hi all ,
>
> Consider a frame-relay setup in which R1 has 2
> point to point subinterfaces going to R2 and R3 .
> Eigrp is running on this topology .
> i have configured R2 as eigrp stub .Now i want to
> block all specific routes to R2 and just inject
> default route from R1 to R2 . Note the default route
> should only be injected to R2 and not R3 .
> Well , the blocking part can be done with the
> distribution-list , but how can i make default-route
> to travel to only R2 and not R3 ????
> Also please let me know various method to inject
> default route in eigrp stub ???
> The Doc CD says the default route in eigrp could be
> controled by :
>
> default-information {in | out} {access-list-number |
> access-list-name}
>
> But no perfect explanation is given regarding the
> same ... can some one please explain this command .
>
> Thanx and regards,
> diptish.
>
>
>
> __________________________________
> Do you Yahoo!?
> Take Yahoo! Mail with you! Get it on your mobile phone.
> http://mobile.yahoo.com/maildemo
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:48 GMT-3