From: Marvin Greenlee (marvingreenlee@yahoo.com)
Date: Wed Jul 07 2004 - 13:15:04 GMT-3
With hosts on the same segment as the cache engine,
you still would do a 'redirect in' on the router. The
in / out is for the direction of the traffic from the
hosts to the router.
The command 'ip wccp redirect' just tells the router
what traffic to redirect (inbound or outbound). It
does not matter where the cache server is. The cache
server sets up a heartbeat between itself and the
router/switch, so that the router/switch knows where
the cache server is.
See also:
WCCP Implementation PDF Presentation.
http://www.cisco.com/warp/public/732/Tech/switching/wccp/docs/WCCP_Implementation.pdf
Sample config for WCCP with a 3550 and a CE
http://www.cisco.com/en/US/products/hw/contnetw/ps761/products_configuration_example09186a0080160b28.shtml
Cisco WCCP Presentations
http://www.cisco.com/warp/public/732/Tech/switching/wccp/presentations.shtml
Marvin Greenlee, CCIE #12237
Network Learning, Inc.
marvin@ccbootcamp.com
--- Karim <karim_ccie@hotmail.com> wrote:
> Thanks for your reply. Just to confirm.
>
> -- The in or out is used according to the direction
> of the traffic. Ex: if
> I am applying the command on an ethernet that is
> connected to the hosts, so
> I will use "ip wccp web cache redirect in".
>
> -- As for having both the host and the engine on the
> same ether segment. And
> asked to apply the ip wccp command on this ethernet
> interface. Will It use
> in or out at the end of the command ??
>
> -- For the example you gave regarding "ip wccp
> <number> redirect <in|out>",
> I believe it can be done also with ip wccp web cache
> redirect. So what is
> the difference ??
>
>
> Karim.
>
__________________________________
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!
http://promotions.yahoo.com/new_mail
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:48 GMT-3