From: Karim (karim_ccie@hotmail.com)
Date: Tue Jul 06 2004 - 18:58:08 GMT-3
Hi all,
Task is asking about balancing between two DLSw peers. No peering exists
between these two remote peers. Required to have unequal balancing with the
ratio 1:2 (i.e: one of the remote peers receives double what the other
receives).
From the Doc CD, I can get that we need:
On the local peer:
dlsw remote-peer 0 tcp x.y.z.v circuit weight 1
dlsw remote-peer 0 tcp r.t.r.z circuit weight 2
dlsw load-balance circuit-count
dlsw timer explorer-wait-time 100
On the remote peers:
Remote peer one:
dlsw local-peer x.y.z.v cost 1 promiscuous
Remote peer two:
dlsw local-peer r.t.r.z cost 1 promiscuous
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fibm_
c/bcfpart2/bcfdlsw.htm#wp1003187
-- Does the previous fullfill the requirement ???
-- what is the usage of the command "dlsw load-balance circuit-count" ??
-- Do we need the "dlsw timer explorer-wait-time 100" ??
-- Why do we need promiscuous in the remote peers ??
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:48 GMT-3