From: TiuN Hong Leng (hongleng@ms73.hinet.net)
Date: Tue Jul 06 2004 - 13:50:44 GMT-3
Hi,
Yes thanks Dan, But why the document says it should be configured on
access ports?
> >
> >
> >
> When connection to Cisco phone there is no need to configure manual
> trunking.
> The Cisco phone uses CDP for several purposes:
>
> * The switch can learn that it is connected to a Cisco phone
> * The switch can tell the phone what VLan tag use for voice, or tell
> the phone to use dot1p to "tag" voice frames
>
> So with Cisco phones no need to configure trunks.
>
> HTH,
> Dan
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:47 GMT-3