DHCP excluded addresses

From: Geert Nijs (geert.nijs@simac.be)
Date: Fri Jul 02 2004 - 13:15:07 GMT-3


Hi group,

If the -real thing- lab asks to configure a simple DHCP server to provide ip addresses to clients,
would you - by default - exclude the routers addresses ??

Suppose you have two routers R3 and R4 on a subnet, together with a IOS DHCP server.....

If i am not mistaken, i read somewere that the IOS DHCP server will ping an ip address 2 times,
before assigning the address to a client. If this is true (?), you really don't need to exclude
the router's ip address. The IOS DHCP server will notice that the two ip addresses are in use.....

So if i don't exclude them, will Cisco deduct points for that ?

Regards,
Geert
#####################################################################################
This e-mail and any attached files are confidential and may be legally privileged.
If you are not the addressee, any disclosure, reproduction, copying, distribution,
or other dissemination or use of this communication is strictly prohibited.
If you have received this transmission in error please notify Simac immediately
and then delete this e-mail.

Simac has taken all reasonable precautions to avoid virusses in this email.
Simac does not accept liability for damage by virusses, for the correct and complete
transmission of the information, nor for any delay or interruption of the transmission,
nor for damages arising from the use of or reliance on the information.

All e-mail messages addressed to, received or sent by Simac or Simac employees
are deemed to be professional in nature. Accordingly, the sender or recipient of
these messages agrees that they may be read by other Simac employees than the official
recipient or sender in order to ensure the continuity of work-related activities
and allow supervision thereof.
#####################################################################################



This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:45 GMT-3