From: Koen Peetermans (K.Peetermans@chello.be)
Date: Wed Jun 30 2004 - 07:00:30 GMT-3
How about a command
"clear frame-relay inarp"
Should help I think....
Kind regards,
Koen.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Lord, Chris
Sent: woensdag 30 juni 2004 11:36
To: Group Study
Subject: Unused DLCIs in the real lab
Quite often in the lab scenarios we are asked only to use the dlci's marked
on the diagram, e.g. use no frame inverse-arp. However, the base config
often has the interface ip addresses specified and frame encapsulation and
no shutdown already defined so dynamic mapping has already kicked-in before
you ever touch the rack. Once you have applied your final config is it best
practice to reboot the routers to clear out all of the junk we don't want.
Doing this might loose you valuable time. If we don't do it will we loose
marks or run the risk of false connectivity if we we just leave the mappings
there? Thoughts!
Regards,
Chris.
**********************************************************************
The information contained in this email is confidential and is intended for
the recipient only. If you have received it in error, please notify us
immediately by reply email and then delete it from your system. Please do
not copy it or use it for any purposes, or disclose its contents to any
other person or store or copy this information in any medium. The views
contained in this email are those of the author and not necessarily those of
Lorien plc.
Thank you for your co-operation.
**********************************************************************
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:53 GMT-3