From: alsontra@hotmail.com
Date: Sat Jun 26 2004 - 12:49:37 GMT-3
Thanks Phil. Question?
Router C connect to Router D via Serial1, but the addresses do not appear to
be on the same network.
Router C
interface Serial1
bandwidth 56
ip address 150.100.10.2 255.255.255.252
ip pim sparse-mode
ip multicast boundary 1
clockrate 56000
Router D
interface Serial1
ip address 150.250.20.2 255.255.255.252
ip pim bsr-border
ip pim sparse-mode
ip multicast boundary 1
With the exception of the following, this is a good resource. The MSDP
config would seem to be correct if router C's serial interface ip address
were 150.250.20.1. Have I missed something?
AMD
----- Original Message -----
From: "Phil" <theccie@gmail.com>
To: <alsontra@hotmail.com>
Cc: <ccielab@groupstudy.com>
Sent: Friday, June 25, 2004 10:37 PM
Subject: Re: MSDP
> I spent about ten days straight studying MSDP and this is the best doc
> I found about it: http://multicast.man.poznan.pl/msdp.html .
>
> Phil
>
> On Fri, 25 Jun 2004 22:06:24 -0700, alsontra@hotmail.com
> <alsontra@hotmail.com> wrote:
> >
> > Does any have a complete MSDP config? I have the basics, but I'm
looking for
> > a completed config as a reference. I've already reference the doc CD.
> > Thanks.
> >
> > example...
> >
> > RP1
> > interface Lo0
> > ip add 10.1.1.1 255.255.255.255
> > interface Lo1
> > ip add 10.0.0.101 255.255.255.255
> > ip msdp peer 10.0.0.102 connect-source lo1
> > ip msdp originator-id lo1
> > RP2
> > interface Lo0
> > ip add 10.1.1.1 255.255.255.255
> > interface Lo1
> > ip add 10.0.0.102 255.255.255.255
> > ip msdp peer 10.0.0.101 connect-source lo1
> > ip msdp originator-id lo1
> >
> > AMD
> >
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:50 GMT-3