From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Fri Jun 25 2004 - 23:50:01 GMT-3
Cisco Bug ID: CSCdp26660
A 2500 router running an IP or above feature set image may restart if
the 'neighbor x.x.x.x default-originate' command is configured for an
established bgp peer.
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCdp26660
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ty
Sent: Friday, June 25, 2004 7:42 PM
To: ccielab@groupstudy.com
Subject: Possible IOS Bug...or not
I'm doing lab IPExpert Lab 32...trying to generate a default route to a
neighbor with certain stipulations that call for a route-map
When I add the command "neighbor 140.10.78.2 default-originate
route-map net"
to the neighbor under BGP, the router reloads.
I am using IOS version c2500-jk8s-l.122-1d.bin
Does anyone know if upgrading to 12.2T will take resolve this ?
I know it doesn't take long to upgrade it, but I don't want to spend
time
upgrading if it doesn't remedy the situation.
Thanks!!
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:50 GMT-3