From: Yasser Abdullah (yasser@alharbitelecom.com)
Date: Wed Jun 23 2004 - 09:36:56 GMT-3
1- 'No peer neighbor route' removes ppp installed host routes. Summarization
can help, but the question is why do you want to remove them? These host
routes solve some FR next hop issues. They are there for a reason.
2- Do you see IPSEC in the exam blueprint? ;)
Yasser
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Nigel.Johnson@barclayscapital.com
Sent: Wednesday, June 23, 2004 1:48 PM
To: chenleish@online.sh.cn; ccielab@groupstudy.com
Subject: RE: questions
A1. I've not tried it but ip think 'no peer neighbor-route' may remove it.
A2. I don't believe it is -
http://www.cisco.com/warp/public/625/ccie/rs/lab_exam_blueprint.html
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of cl
Sent: 23 June 2004 07:01
To: ccielab@groupstudy.com
Subject: questions
1!" when i enable ospf on the frame-relay interface,and the interface use
"ip ospf network p2mp" ,it will generate the interface address as a /32
route in routing table , how to get rid of it?
2!"is IPSEC include in the R&S lab ?
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:48 GMT-3