From: pbubienczyk@szczesliwice.pl
Date: Wed Jun 23 2004 - 08:03:49 GMT-3
I've got the problem with my VOIP network
I've two gateways (2651 with 12.2(11)T6 and 2621XM with 12.2(8)T5), they are
connected with two PBX Alcatel 4400 by ISDN BRI(2651) and PRI(2621XM) trunks.
I've problem with the facility message in ISDN SETUP message. Seems like PBX
don't like it and not accepting the connection.
Previously BRI trunk (now on 2561) ran on 3640(with 12.2(5)) and my VOIP was
working fine, and I think that there was no facility messages in ISDN SETUP.
Somebody knows how to get this facility out of ISDN SETUP message, or how to
fix the problem???
Log from 2651:
Jun 23 09:33:13: ISDN BR1/0 Q931: TX -> SETUP pd = 8 callref = 0x24
Bearer Capability i = 0x8090A3
Standard = CCITT
Transer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x83
Facility i =
0x9E0100036774640000002E49414D2C0D0A4743492C366266386631333463343165313164383933
31636164386532346238646132310D0A0D0A
- Unknown Service Discriminator
Calling Party Number i = 0x0181, '225852536'
Plan:ISDN, Type:Unknown
Called Party Number i = 0xA1, '817'
Plan:ISDN, Type:National
High Layer Compat i = 0x9181
Jun 23 09:33:13: ISDN BR1/0 Q931: RX <- STATUS pd = 8 callref = 0xA4
Cause i = 0x81E41C - Invalid information element contents
Call State i = 0x06
Jun 23 09:33:13: ISDN BR1/0 Q931: TX -> RELEASE pd = 8 callref = 0x24
Cause i = 0x80E5 - Message not compatible with call state
thx - Peter
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:48 GMT-3