From: John Underhill (stepnwlf@magma.ca)
Date: Sun Jun 20 2004 - 04:21:22 GMT-3
You only have to look at the help output..
R1(config-if)#ip irdp pref ?
<-2147483648 - 2147483647> preference for this address (higher values
preferred)
----- Original Message -----
From: "Phil" <theccie@gmail.com>
To: "Richard Anderson" <richard.p.anderson@sbcglobal.net>
Cc: "Tom Rogers" <cccie71@yahoo.com>; <ccielab@groupstudy.com>
Sent: Sunday, June 20, 2004 2:31 AM
Subject: Re: IRDP
> Try a search in the archives for "irdp preference". I remember this
> being discussed in the past.
>
> Phil
>
> On Sat, 19 Jun 2004 21:39:15 -0700, Richard Anderson
> <richard.p.anderson@sbcglobal.net> wrote:
> >
> > Tom,
> >
> > I am little confused. I don't know what practice lab has this type of
> > scenerio with a wierd answer. To me, Preferred router should have a
higher
> > preference.
> >
> >
> >
> > ----- Original Message -----
> > From: "Tom Rogers" <cccie71@yahoo.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Friday, June 18, 2004 10:51 AM
> > Subject: IRDP
> >
> > > I thought I was clear on IRDP, but after reading a solution, it has
made
> > me confused.
> > >
> > > I went through the doc cd and some books. They say if a router is to
be
> > preferred increase the preferece value in it.
> > >
> >
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipr
> > as_r/1rfipadr.htm#wp1018753
> > >
> > > But in a scenario the question is like this.................
> > >
> > > R6 is to be preferred as default gateway over R3.
> > > Solution says, to lower the preference value for R6.
> > > The solutuon has R6 as iprdp preference= 100 and R3 as 200 and yet
they
> > say R6 will be preferred.
> > > Is this correct? Should'nt it be other way round?
> > > According to me if R6 is to be preferred it should be 200 and r3 as
100.
> > > Can some one throw some light on this.... please..
> > > What wrong am I thinking....
> > >
> > > Tom
> > >
> > >
> > > ---------------------------------
> > > Do you Yahoo!?
> > > Yahoo! Mail Address AutoComplete - You start. We finish.
> > >
> > >
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:44 GMT-3