From: Richard Dumoulin (richard.dumoulin@vanco.es)
Date: Wed Jun 16 2004 - 21:21:22 GMT-3
I think you will need to find out what trunking method your phone uses. If
it is dot1q then explicitly configure that. Also only "mls qos trust cos
command will work.
This one "switchport priority extend trust" won't do nothing,
--RIchard
-----Original Message-----
From: Tom Young [mailto:gitsyoung@yahoo.co.jp]
Sent: jueves, 17 de junio de 2004 2:17
To: Richard Dumoulin
Cc: ccielab@groupstudy.com
Subject: RE: Voice vlan setting
Richard
If my IP phone is not the cisco ip phone. And only
voice communication be used . How about that two commands?
And the cdp will not work correctly, does some affect will happened ?
Thanks alot
--- Richard Dumoulin <richard.dumoulin@vanco.es> $B$+$i$N(J
$B%a%C%;!<%8!'(J
> Do you want the pc attached to the phone to be
> trsuted by the phone ? If yes
> then you need "switchport priority extend trust".
> Then the switch will trust
> both the voice and the pc thx to "mls qos trust
> cos".
> If not then just "mls qos trust cos" as the phone
> will override pc traffic
> to COS 0,
>
> --Richard
>
> -----Original Message-----
> From: Tom Young [mailto:gitsyoung@yahoo.co.jp]
> Sent: miircoles, 16 de junio de 2004 17:08
> To: ccielab@groupstudy.com
> Subject: Voice vlan setting
>
>
> Hi, group
>
> Look the two commands below for setting voice vlan.
> If I
> want to trust a VoIP telephone setting, should I
> need set
> the two command on the voice vlan interface ?
>
> switchport priority extend trust
> mls qos trust cos
>
> Thanks alot
>
>
>
> __________________________________________________
> Do You Yahoo!?
> http://bb.yahoo.co.jp/
>
>
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:42 GMT-3