From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Wed Jun 16 2004 - 18:24:02 GMT-3
Art,
I replied to your post in our forum.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Art Lee
Sent: Wednesday, June 16, 2004 2:08 PM
To: ccielab@groupstudy.com
Subject: InternetworkExpert Lab 15 ip pim sparse-mode....
Is any one familiar with InternetworkExpert Lab 15 Section 7.1-7.7? I
have configured ip pim sparse mode on the required rtr's & sw's. Have
setup the required rp's & the bsr. Have taken into account nbma-mode on
the hubs. I don't have rp mappings on R3. Can't get the bsr to map the
rp's to the multicast groups. I think I am missing something. Could
someone point me in a troubleshooting direction? Also, I donot
understand the R4 & R5 configs in the solution guide. The serial
interfaces don't exist on the diagram or configs.
-- *********************** Art Lee bahia111@comcast.net Digital Pixels
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:42 GMT-3