From: McNeace, Roger (RMcNeace@ciena.com)
Date: Wed Jun 16 2004 - 11:36:34 GMT-3
Try shutting down the interface that is currently the RouterID, then clear the OSPF process.
Ciena Corporation
Roger McNeace, CCIE #12777
Senior Network Engineer
-----Original Message-----
From: Victor Kasacavage [mailto:victor.kasacavage@ins.com]
Sent: Wednesday, June 16, 2004 10:27 AM
To: TiuN Hong Leng; ccielab@groupstudy.com
Subject: Re: OSPF Router ID change
You could remove the OSPF routing process from the router and reconfigure it
At 10:19 PM 6/16/2004 +0800, TiuN Hong Leng wrote:
>Hi,
>
>Once we add a lookback interface when the router-id of OSPF is from a
>physical interface, it won't change the router-id to the lookback's
>address. It's not wroking even "clear ip ospf process". We have to
>reload the router to force the router-id to be lookback's address.
>
>Same situation happens when add another lookback interface which address
>is higher than the router-id from a lookback.
>
>Is there anyway besides reload?
>
>Thanks a lot!
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
Victor Kasacavage CCIE#6012
Senior Network Systems Consultant
NGN Infrastructure Practice Lead
International Network Services
victor.kasacavage@ins.com
cell (610) 306-1629
http://www.ins.com/solutions/infrastructure.asp
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:41 GMT-3