From: ccie (ccie@netchild.pub.sa)
Date: Tue Jun 15 2004 - 00:37:10 GMT-3
Hi Scott,
aha, then this is the mechanism in the iBGP that force use to have
full-meshed desgin or use route reflector, or confideration.
thanx Scott for your explaination.
NetChild,
----- Original Message -----
From: "Scott Morris" <swm@emanon.com>
To: "'ccie'" <ccie@netchild.pub.sa>; <ccielab@groupstudy.com>
Sent: Monday, June 14, 2004 8:02 PM
Subject: RE: How does iBGP work ?
> The router doesn't care whether there's a mesh or not....
>
> The rule is that routes learned via internal partners are not sent on to
any
> other internal partners. Therefore, if you don't design a mesh or a
> reflector (to overcome this rule), your network won't be complete. The
> router could care less though!
>
>
> Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, CISSP,
> JNCIP, et al.
> IPExpert CCIE Program Manager
> IPExpert Sr. Technical Instructor
> swm@emanon.com/smorris@ipexpert.net
> http://www.ipexpert.net
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie
> Sent: Monday, June 14, 2004 11:55 AM
> To: ccielab@groupstudy.com
> Subject: How does iBGP work ?
>
> Hi,
>
> I know with iBGP you need to have full-mesh peering or use either
> route-reflector, or confederation. My question is how will the router know
> there is not full-mesh peering ? What the mechanism he use for that ?!
>
> Thanx,
> NetChild,
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:40 GMT-3