From: nettable_walker (nettable_walker@hotmail.com)
Date: Mon Jun 14 2004 - 15:20:20 GMT-3
Professionals, I upgraded a working 3550-48 to new code now cannot get the
Catalyst to boot - it will boot to the switch: prompt
TAC tells me it's dead
This is my lab switch so I do not have a contract to RMS it against.
Has anyone seen this behaivior in a 3550 ?
needless to say, I have already eraseed the flash, then did an xmodem to
make sure it was not the .bin file that was causeing problems.
I also took the cover off but don't see any flash chip to reset.
Thanks,
Richard
#12388
//
Base ethernet MAC Address: 00:0a:8a:1d:d1:00
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
flashfs[0]: 3 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 4926976
flashfs[0]: Bytes available: 11072000
flashfs[0]: flashfs fsck took 17 seconds.
..done Initializing Flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.
switch:
switch:
switch: flash_init
Initializing Flash...
..The flash is already initialized.
switch: load_helper
switch: dir flash:
Directory of flash:/
2 -rwx 43 <date> system_env_vars
4 -rwx 4924672 <date> c3550-i5k2l2q3-mz.121-20.EA2.bin
5 -rwx 60 <date> env_vars
11072000 bytes available (4926976 bytes used)
switch: set boot flash:c3550-i5k2l2q3-mz.121-20.EA2.bin
switch: boot
Loading "flash: c3550-i5q3l2-mz.121-20.EA2.bin"...flash:
c3550-i5q3l2-mz.121-20.EA2.bin: no such file or directory
Error loading "flash: c3550-i5q3l2-mz.121-20.EA2.bin"
Interrupt within 5 seconds to abort boot process.
Loading
"flash:/c3550-i5k2l2q3-mz.121-20.EA2.bin"...################################
############################################################################
############################################################################
############################################################################
############################################################################
############################################################################
############################################################################
############################################################################
####################
File "flash:/c3550-i5k2l2q3-mz.121-20.EA2.bin" uncompressed and installed,
entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C3550 Software (C3550-I5K2L2Q3-M), Version 12.1(20)EA2, RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 19-May-04 05:41 by antonino
Image text-base: 0x00003000, data-base: 0x00964540
Initializing flashfs...
flashfs[1]: 3 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 4926976
flashfs[1]: Bytes available: 11072000
flashfs[1]: flashfs fsck took 8 seconds.
flashfs[1]: Initialization complete.
..done Initializing flashfs.
POST: CPU Buffer Tests : Begin
POST: CPU Buffer Tests : End, Status Passed
POST: CPU Interface Tests : Begin
Error while testing CPU Interface channel 0 on switch core 0.
Bad class type field, expected 0x18, actual 0x00
POST: CPU Interface Tests : End, Status Failed
SYSTEM INIT: INSUFFICIENT MEMORY(6000 BYTES) TO BOOT THE IMAGE!
Local Memory Free = 3920 Total = 51975728 Used = 51971808
IO Memory Free = 3920 Total = 51975728 Used = 51971808
1E84A4
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:40 GMT-3