From: Richard Dumoulin (richard.dumoulin@vanco.es)
Date: Mon Jun 14 2004 - 13:15:40 GMT-3
Hi Geert,
Thx for the reply. I have difficulties understanding (_\3)*. Could you
please explain ?
--Richard
-----Original Message-----
From: Geert Nijs [mailto:geert.nijs@simac.be]
Sent: lunes, 14 de junio de 2004 18:04
To: Alexander Arsenyev (GU/ETL); ccielab@groupstudy.com
Subject: RE: AS PATH
The regular expression to match AS 100 and any directly connected AS,
including AS-path-prepending is:
^100(_100)*(_([0-9]+)(_\3)*)?$
Regards,
Geert
-----Oorspronkelijk bericht-----
Van: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Namens Alexander
Arsenyev (GU/ETL)
Verzonden: maandag 14 juni 2004 16:13
Aan: ccielab@groupstudy.com
Onderwerp: RE: AS PATH
Actually (10)+ in Cisco regexp means 10 or 1010, not 10_10_10_... Please
remember that AS number is 2 bytes long so there is no such thing as
AS 101010.
To match neighbor AS number with prepends and its direct customers (no
prepends) use ^(AS#_)+[0-9]*$ I've tried to develop AS path regexp which
matches neighbor AS with prepends and its direct customers with prepends but
no luck so far. The trick is that this regexp should match only 2 different
AS numbers in AS Path while ([0-9]+_)* matches ANY number of different AS
numbers in AS path because regexp are "greedy" (I think).
HTH,
Cheers
Alex
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Scott
Morris
Sent: 12 June 2004 14:36
To: 'Richard Dumoulin'; ccielab@groupstudy.com
Subject: RE: AS PATH
If you want to take into account the pre-pending of an ACL, you would
associate the "+" character, which is "one or more of the preceding value".
Don't forget to create a character class though with ().
If you put 10+ by itself, that only treats the "0" as "one or more", so 10,
100, 1000, 10000 would match.
If you do (10)+ that will treat "10" as the thing to repeat. So whether my
as-path has 10 or 10 10 10 10 10 doesn't matter.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, CISSP,
JNCIP, et al. IPExpert CCIE Program Manager IPExpert Sr. Technical
Instructor swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Richard Dumoulin
Sent: Saturday, June 12, 2004 9:19 AM
To: 'ccielab@groupstudy.com'
Subject: AS PATH
Some time ago, someone posted a link where an example of as-path access-list
which embraced a neighbor AS plus its directed customers was shown.
This acl did take into account prepending from those AS's.
If anyone conserves this post would he send it again please ? I 've
searched the archives but in vane,
Thanks
--Richard
**********************************************************************
Any opinions expressed in the email are those of the individual and not
necessarily the company. This email and any files transmitted with it are
confidential and solely for the use of the intended recipient. If you are
not the intended recipient or the person responsible for delivering it to
the intended recipient, be advised that you have received this email in
error and that any dissemination, distribution, copying or use is strictly
prohibited.
If you have received this email in error, or if you are concerned with the
content of this email please e-mail to: e-security.support@vanco.co.uk
The contents of an attachment to this e-mail may contain software viruses
which could damage your own computer system. While the sender has taken
every reasonable precaution to minimise this risk, we cannot accept
liability for any damage which you sustain as a result of software viruses.
You should carry out your own virus checks before opening any attachments to
this e-mail.
**********************************************************************
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:40 GMT-3