From: Pierre-Alex Guanel (pierreg@planetkc.com)
Date: Sat Jun 12 2004 - 13:29:01 GMT-3
RE: SR/TLBRichard,
I have read about NHRP ... This stuff is seems to be meant for NBMA
networks.
How do I apply it to this situation and where does the GRE tunnel fall in the
picture.
I am trying have all the traffic on R5 token ring bridged to the R1-R3
segment WITHOUT adding another IP subnet between R1 and R5....
R3---- (Ethernet)---------R1------- (token ring)------R5==== isdn
Thanks
Pierre-Alex Guanel
----- Original Message -----
From: Richard Dumoulin
To: Pierre-Alex Guanel ; Ccielab@Groupstudy.Com
Sent: Saturday, June 12, 2004 4:19 PM
Subject: RE: SR/TLB
You might want to try NHRP with GRE ! I believe this would solve your
issue.
--Richard
-----Original Message-----
From: Pierre-Alex Guanel [mailto:pierreg@planetkc.com]
Sent: sabado, 12 de junio de 2004 16:58
To: Pierre-Alex Guanel; Ccielab@Groupstudy.Com
Subject: Re: SR/TLB
Responding to my own post:
I find it hard to believe but according to Cisco SR/TLB does NOT work with
IP.
My reference is :
http://www.cisco.com/warp/public/701/4.html
Check section "Translational Bridging", 3rd paragraph , last sentence.
Can anyone who has lab or real-life experience with this confirm?
Thanks,
Pierre-Alex
----- Original Message -----
From: "Pierre-Alex Guanel" <pierreg@planetkc.com>
To: "Ccielab@Groupstudy.Com" <ccielab@groupstudy.com>
Sent: Saturday, June 12, 2004 2:18 PM
Subject: SR/TLB
> Hi,
>
> I am using source route translation bridging to connect my isdn router
> R5
to a
> ethernet segment.
>
> ==========================
> Here is the case scenario:
>
> R3---- (Ethernet)---------R1------- (token ring)------R5==== isdn
> cloud
>
> ==========================
>
> Here is what I have done:
>
> On R1:
>
> source-bridge ring-group 1000
> source-bridge transparent 1000 3 1 1
> !
> interface Ethernet0
> no ip address
> bridge-group 1
> !
> interface TokenRing0
> no ip address
> source-bridge 1 1 1000
> !
>
>
> on R5:
> !
> interface TokenRing0
> ip address 183.1.58.5 255.255.255.0
> ring-speed 16
>
>
> on R3
>
> interface Ethernet0
> ip address 183.1.58.3 255.255.255.0
>
> ==========================
> . I can not ping R3 from R5
>
> I based my configs on the URL :
>
> http://www.cisco.com/warp/public/698/srtlb.shtml
>
> Is there something else I must configure on R5 token ring interface to
make
> this work.
>
>
> ==========================
>
>
> Much thanks,
>
> Pierre-Alex Guanel
>
> ______________________________________________________________________
> _
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________
Please help support GroupStudy by purchasing your study materials from:
http://shop.groupstudy.com
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
**********************************************************************
Any opinions expressed in the email are those of the individual and not
necessarily the company. This email and any files transmitted with it are
confidential and solely for the use of the intended recipient. If you are not
the intended recipient or the person responsible for delivering it to the
intended recipient, be advised that you have received this email in error and
that any dissemination, distribution, copying or use is strictly prohibited.
If you have received this email in error, or if you are concerned with the
content of this email please e-mail to: e-security.support@vanco.co.uk
The contents of an attachment to this e-mail may contain software viruses
which could damage your own computer system. While the sender has taken every
reasonable precaution to minimise this risk, we cannot accept liability for
any damage which you sustain as a result of software viruses. You should carry
out your own virus checks before opening any attachments to this e-mail.
**********************************************************************
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:39 GMT-3