From: Kinney Robert-RKINNEY1 (Robert.Kinney@motorola.com)
Date: Fri Jun 11 2004 - 09:38:03 GMT-3
This approach will only verify if all routes are in all routers. To verify full reachability to all routes from all routers, check out the TCL script:
Tclsh
Foreach IP {
Address_1
Address_2
...
Address_n
} {pint $IP}
This is easy to configure in notepad and will quickly point out any routing issues in the network.
Rob K.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Dan
Sent: Friday, June 11, 2004 1:19 AM
To: TiuN Hong Leng
Cc: ccielab@groupstudy.com
Subject: Re: "full reachability" verification strategey in LAB exam!
If there is no chance for routing loops or not optimal routes then:
open notepad and for each network write:
X 192.168.1.0 255.255.255.0 Z
X 192.169.1.0 255.255.255.252 Z
......
then using the replace option of notepad replace X with 'show ip route'. and replace Z with ' | include not'
the output should be:
show ip route 192.168.1.0 255.255.255.0 | include not
show ip route 192.169.1.0 255.255.255.252 | include not
then copy the text and run it on the router. You will get error messages
for every route not in table.
Run these commands on all routers.
I will take you about 5 min to check all the routers!!!
TiuN Hong Leng wrote:
>Hi group,
>
>Since there are a lot of things to do in the 8 hours, I am looking for
>the efficient "full reachability" or route verification strategy/tips
>in LAB exam.
>
>Please share your experience and opinion with me!
>
>Thanks a lot!
>
>Chang
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:37 GMT-3