From: Michael Snyder (msnyder@revolutioncomputer.com)
Date: Wed Jun 09 2004 - 11:13:07 GMT-3
Check the archives for the needed config commands. The voip fxs port
uses timing from the cable port. There's needed command to generate
it's own voip timing.
Anyway, a useable 924 config has been posted multiple times.
-----Original Message-----
From: Tasuka Amano Hsu [mailto:tasuka@tailyn.com.tw]
Sent: Wednesday, June 09, 2004 4:12 AM
To: Peng Zheng
Cc: ccielab@groupstudy.com
Subject: Re: back-to-back Cisco UBR924
No, you can not, you just can use the ethernet port to do VoIP test.
Sincerely,
Tasuka
On Tue, 8 Jun 2004, Peng Zheng wrote:
> Date: Tue, 08 Jun 2004 23:08:46 -0700 (PDT)
> From: Peng Zheng <zpnist@yahoo.com>
> To: ccielab@groupstudy.com
> Subject: back-to-back Cisco UBR924
>
> I want to try VoIP. Because the port on UBR924 are
> for cable, is it possible to connect two UBR924
> back-to-back through cable port.
>
>
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Friends. Fun. Try the all-new Yahoo! Messenger.
> http://messenger.yahoo.com/
>
>
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:36 GMT-3