RE: ATM

From: Mohammad Zahid Saeed (msaeed@uaeu.ac.ae)
Date: Tue Jun 08 2004 - 10:15:33 GMT-3

• Next message: Dan: "My first but not last :( - Need your help."
• Previous message: Walker, James - Is: "RE: ATM"
• Maybe in reply to: Ludwig Morales: "ATM"
• Next in thread: Walker, James - Is: "RE: ATM"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi James,
If some one has two routers with two ATM cards, can he perform ATM
related tasks for CCIE lab preparation by connection these two cards
directly without ATM switch?

Regards,

Mohammad Zahid Saeed

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Walker, James - Is
Sent: Tuesday, June 08, 2004 4:57 PM
To: 'Ludwig Morales'; ccielab@groupstudy.com
Subject: RE: ATM

Yes. Make sure you have 2 routers with atm interfaces that will connect
to the
switch. I'd make sure that they were the same type, SM or MM, and not
DS3 or T3
because you don't have those interfaces.

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Ludwig Morales
Sent: Tuesday, June 01, 2004 10:07 PM
To: ccielab@groupstudy.com
Subject: ATM

Hi everybody!!

Can i use a lightstream 1010n with the fallowing modules to simulate
ATM for
my lab.

Thanks

Module 3/0: 155SM - 4 Port Fibre/ATM

Module 3/1: 155SM/MM - 4 Port Fibre/ATM

Module 4/0: 155SM - 4 Port Fibre/ATM

Module 4/1: 155SM - 4 Port RJ45/ATM

• Next message: Dan: "My first but not last :( - Need your help."
• Previous message: Walker, James - Is: "RE: ATM"
• Maybe in reply to: Ludwig Morales: "ATM"
• Next in thread: Walker, James - Is: "RE: ATM"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:35 GMT-3