From: John Matus (jmatus@pacbell.net)
Date: Tue Jun 08 2004 - 09:19:36 GMT-3
ahhhh, ok, i redistributed eigrp 10 into bpg 200 on r5 to give bb2 the
routing information.....and it WORKS!!! wow, that only took me 2 1/2
hours
thanks for the help!!
Regards,
John D. Matus
MCSE, CCNP
818.782.2061 office
818.430.8372 mobile
jmatus@pacbell.net
----- Original Message -----
From: "Yasser Abdullah" <yasser@alharbitelecom.com>
To: "'John Matus'" <jmatus@pacbell.net>; "'Richard Dumoulin'"
<richard.dumoulin@vanco.es>; "'lab'" <ccielab@groupstudy.com>
Sent: Tuesday, June 08, 2004 4:43 AM
Subject: RE: bgp woes....synchronization problem<??>
> Telnet to the backbone (192.10.1.254) and verify its routing table. Most
> probably it doesn't have a route back to R4.
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
John
> Matus
> Sent: Tuesday, June 08, 2004 2:28 PM
> To: Richard Dumoulin; lab
> Subject: Re: bgp woes....synchronization problem<??>
>
> RE: bgp woes....synchronization problem<??>i'm trying ot ping 222.22.2.1
> from
> r4. i am also unable to ping the backbone at 192.10.1.254 <but am
> successful
> from r5> the backbone is unavailable to me so it know's nothing of r4
<i'm
> assuming>.
>
> Regards,
>
> John D. Matus
> MCSE, CCNP
> 818.782.2061 office
> 818.430.8372 mobile
> jmatus@pacbell.net
>
>
> ----- Original Message -----
> From: Richard Dumoulin
> To: John Matus ; lab
> Sent: Tuesday, June 08, 2004 4:15 AM
> Subject: RE: bgp woes....synchronization problem<??>
>
>
> Which IP address are you pinging from on R4. The backbone router does
not
> know any of R4 ip addresses right ? Are you advertising any ?
>
> --Richard
>
> -----Original Message-----
> From: John Matus [mailto:jmatus@pacbell.net]
> Sent: martes, 08 de junio de 2004 12:57
> To: lab
> Subject: bgp woes....synchronization problem<??>
>
>
>
> i've got 2 router, r4 and r5 that are in the same as <200>. r5 connects
> to
> a backbone router at 192.10.1.254 in as 254 and is learning additional
> prefixes from there.
>
> the problem i'm having is that i can ping 222.22.2.1 from r5 but not
from
> r4, even though i have the network in stalled in the bgp table. i've
tried
> various methods to remedy this <route-reflector, synchronization, next-hop
>
> self>, but i can't seem to make it work <getting very frustrated here.
>
> i've included the configs for r4 and r5 along w/ the bgp tables. any
> ideas
> as to why i can't reach 222.22.2.1` would be MOST helpful!!!!!
>
> r5#sh run
> Building configuration...
>
> Current configuration : 3165 bytes
> !
> version 12.2
> service timestamps debug datetime msec
> service timestamps log datetime msec
> no service password-encryption
> !
> hostname r5
> !
> logging queue-limit 100
> enable password cisco
> !
> username r4 password 0 cisco
> memory-size iomem 15
> ip subnet-zero
> !
> !
> no ip domain lookup
> !
> ip audit notify log
> ip audit po max-events 100
> mpls ldp logging neighbor-changes
> !
> !
> !
> isdn switch-type basic-ni
> !
> !
> !
> !
> !
> !
> !
> !
> !
> no voice hpi capture buffer
> no voice hpi capture destination
> !
> !
> mta receive maximum-recipients 0
> !
> !
> !
> !
> interface Loopback0
> ip address 150.1.5.5 255.255.255.0
> !
> interface Ethernet0/0
> ip address 192.10.1.5 255.255.255.0
> half-duplex
> !
> interface Serial0/0
> no ip address
> encapsulation frame-relay
> frame-relay lmi-type cisco
> !
> interface Serial0/0.45 point-to-point
> ip address 173.1.54.5 255.255.255.0
> backup interface BRI0/0
> frame-relay interface-dlci 504
> !
> interface Serial0/0.125 multipoint
> ip address 173.1.125.5 255.255.255.0
> ip ospf network point-to-multipoint non-broadcast
> ip ospf hello-interval 2
> ip ospf dead-interval 6
> ip ospf priority 5
> frame-relay interface-dlci 501
> frame-relay interface-dlci 502
> !
> interface BRI0/0
> no ip address
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-ni
> isdn spid1 0835866201 8358662
> isdn spid2 0835866401 8358664
> !
> interface Ethernet1/0
> ip address 173.1.5.5 255.255.255.0
> half-duplex
> !
> interface Dialer0
> ip address 173.1.45.5 255.255.255.0
> ip bandwidth-percent eigrp 10 15
> encapsulation ppp
> dialer pool 1
> dialer idle-timeout 0
> dialer string 8358661
> dialer persistent
> dialer-group 1
> !
> router eigrp 10
> redistribute ospf 1 metric 1000 100 255 1 1500
> network 173.1.5.5 0.0.0.0
> network 173.1.45.5 0.0.0.0
> network 173.1.54.5 0.0.0.0
> no auto-summary
> eigrp router-id 5.5.5.5
> !
> router ospf 1
> router-id 5.5.5.5
> log-adjacency-changes
> redistribute eigrp 10 metric-type 1 subnets
> network 150.1.5.5 0.0.0.0 area 0
> network 173.1.125.5 0.0.0.0 area 0
> neighbor 173.1.125.2 cost 1562
> neighbor 173.1.125.1 cost 130
> !
> router bgp 200
> no synchronization
> bgp router-id 5.5.5.5
> bgp log-neighbor-changes
> network 192.10.1.0
> network 192.10.1.254 mask 255.255.255.255
> neighbor 150.1.1.1 remote-as 100
> neighbor 150.1.1.1 ebgp-multihop 255
> neighbor 150.1.1.1 update-source Loopback0
> neighbor 150.1.2.2 remote-as 100
> neighbor 150.1.2.2 ebgp-multihop 255
> neighbor 150.1.2.2 update-source Loopback0
> neighbor 150.1.4.4 remote-as 200
> neighbor 150.1.4.4 update-source Loopback0
> neighbor 150.1.6.6 remote-as 200
> neighbor 150.1.6.6 update-source Loopback0
> neighbor 192.10.1.254 remote-as 254
> neighbor 192.10.1.254 password CISCO
> no auto-summary
> !
> ip http server
> no ip http secure-server
> ip classless
> !
> ip ospf name-lookup
> !
> !
> dialer-list 1 protocol ip permit
> !
> !
> call rsvp-sync
> !
> !
> mgcp profile default
> !
> !
> !
> dial-peer cor custom
> !
> !
> !
> !
> alias exec c conf t
> alias exec s show ip route
> alias exec sib show ip interface brief
> alias exec b show ip bgp sum
> alias exec e show ip eig nei
> alias exec o show ip o nei
> !
> line con 0
> exec-timeout 0 0
> privilege level 15
> logging synchronous
> line aux 0
> exec-timeout 0 0
> privilege level 15
> line vty 0 4
> password cisco
> login
> !
> !
> end
>
> r5#sh ip b
> BGP table version is 5, local router ID is 5.5.5.5
> Status codes: s suppressed, d damped, h history, * valid, > best, i -
> internal,
> r RIB-failure, S Stale
> Origin codes: i - IGP, e - EGP, ? - incomplete
>
> Network Next Hop Metric LocPrf Weight Path
> *> 192.10.1.0 0.0.0.0 0 32768 i
> *> 205.90.31.0 192.10.1.254 0 0 254 ?
> *> 220.20.3.0 192.10.1.254 0 0 254 ?
> *> 222.22.2.0 192.10.1.254 0 0 254 ?
>
>
>
>
> r4#sh run
> Building configuration...
>
> Current configuration : 2823 bytes
> !
> version 12.2
> service timestamps debug datetime msec
> service timestamps log datetime msec
> no service password-encryption
> !
> hostname r4
> !
> logging queue-limit 100
> enable password cisco
> !
> username r5 password 0 cisco
> memory-size iomem 15
> ip subnet-zero
> !
> !
> no ip domain lookup
> !
> ip multicast-routing
> ip audit notify log
> ip audit po max-events 100
> mpls ldp logging neighbor-changes
> !
> !
> !
> isdn switch-type basic-ni
> !
> !
> !
> !
> !
> !
> !
> !
> !
> no voice hpi capture buffer
> no voice hpi capture destination
> !
> !
> mta receive maximum-recipients 0
> !
> !
> !
> !
> interface Loopback0
> ip address 150.1.4.4 255.255.255.0
> !
> interface Tunnel0
> ip address 173.1.47.4 255.255.255.0
> ip pim dense-mode
> ip multicast boundary 5
> tunnel source Loopback0
> tunnel destination 150.1.7.7
> !
> interface FastEthernet0/0
> ip address 173.1.46.4 255.255.255.0
> duplex auto
> speed auto
> !
> interface Serial0/0
> no ip address
> encapsulation frame-relay
> frame-relay lmi-type cisco
> !
> interface Serial0/0.45 point-to-point
> ip address 173.1.54.4 255.255.255.0
> frame-relay interface-dlci 405
> !
> interface BRI0/0
> no ip address
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-ni
> isdn spid1 0835866101 8358661
> isdn spid2 0835866301 8358663
> !
> interface FastEthernet0/1
> ip address 173.1.4.4 255.255.255.0
> ip pim dense-mode
> ip multicast boundary 5
> ip igmp join-group 227.69.53.7
> duplex auto
> speed auto
> !
> interface Dialer0
> ip address 173.1.45.4 255.255.255.0
> ip bandwidth-percent eigrp 10 15
> encapsulation ppp
> dialer pool 1
> dialer idle-timeout 0
> !
> router eigrp 10
> network 150.1.4.4 0.0.0.0
> network 173.1.4.4 0.0.0.0
> network 173.1.45.4 0.0.0.0
> network 173.1.46.4 0.0.0.0
> network 173.1.54.4 0.0.0.0
> no auto-summary
> eigrp router-id 4.4.4.4
> !
> router bgp 200
> no synchronization
> bgp router-id 4.4.4.4
> bgp log-neighbor-changes
> neighbor 150.1.5.5 remote-as 200
> neighbor 150.1.5.5 update-source Loopback0
> neighbor 150.1.6.6 remote-as 200
> neighbor 150.1.6.6 update-source Loopback0
> no auto-summary
> !
> ip http server
> no ip http secure-server
> ip classless
> ip route 222.22.2.1 255.255.255.255 150.1.5.5
> !
> !
> !
> access-list 5 permit 227.69.53.7
> dialer-list 1 protocol ip permit
> !
> !
> call rsvp-sync
> !
> voice-port 1/0/0
> !
> voice-port 1/0/1
> !
> !
> mgcp profile default
> !
> !
> !
> dial-peer cor custom
> !
> !
> !
> dial-peer voice 1 pots
> destination-pattern 5550001
> port 1/0/0
> !
> dial-peer voice 2 pots
> destination-pattern 5550002
> port 1/0/1
> !
> dial-peer voice 3 voip
> destination-pattern 5281101
> session target ipv4:222.22.2.1
> !
> !
> alias exec c conf t
> alias exec s show ip route
> alias exec sib show ip interface brief
> alias exec b show ip bgp sum
> alias exec e show ip eig nei
> alias exec o show ip o nei
> !
> line con 0
> exec-timeout 0 0
> privilege level 15
> logging synchronous
> line aux 0
> exec-timeout 0 0
> privilege level 15
> line vty 0 4
> password cisco
> login
>
> r4#sh ip b
> BGP table version is 13, local router ID is 4.4.4.4
> Status codes: s suppressed, d damped, h history, * valid, > best, i -
> internal,
> r RIB-failure, S Stale
> Origin codes: i - IGP, e - EGP, ? - incomplete
>
> Network Next Hop Metric LocPrf Weight Path
> *>i192.10.1.0 150.1.5.5 0 100 0 i
> *>i205.90.31.0 192.10.1.254 0 100 0 254 ?
> *>i220.20.3.0 192.10.1.254 0 100 0 254 ?
> *>i222.22.2.0 192.10.1.254 0 100 0 254 ?
>
> !
> !
> end
>
>
>
> Regards,
>
> John D. Matus
> MCSE, CCNP
> 818.782.2061 office
> 818.430.8372 mobile
> jmatus@pacbell.net
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:35 GMT-3